Patio Cleaning
High-pressure washing to remove dirt, grime, and stains from patios, restoring their appearance.
Patio cleaning uses high-pressure water to remove dirt, algae, moss, and stains from concrete, stone, or wood surfaces. It restores the original look of outdoor spaces, improving curb appeal and usability. The process targets built-up grime that regular cleaning cannot address.

What patio cleaning actually involves, step by step
Surface material check. Stamped, colored, or sealed concrete is identified separately from plain broom-finish concrete before pressure is applied, since a sealed or decorative surface can discolor or lose its finish under the pressure setting that plain concrete tolerates without issue.
We also handle Pool Deck Cleaning and Rust Removal for Brandon properties.
Detergent application. A degreasing or stain-lifting solution is applied to oil spots, tire marks, and organic staining and left to dwell, since pressure alone tends to spread an oil stain outward into the surrounding concrete rather than actually lifting it out of the pores.
Surface cleaning pass. The surface is cleaned in overlapping passes with a surface cleaner attachment held at a consistent distance and angle, which produces an even result across the slab instead of the ringed or striped pattern a handheld wand leaves on a large flat area.
Edge and joint detail. Expansion joints, edges along garden beds, and corners the surface cleaner can't reach are finished separately at a lower pressure, since those areas are also where a wand held too close is most likely to etch a visible line into the concrete.
Rinse and runoff containment. The area is given a final clear-water rinse, and runoff containing detergent or lifted contaminants is directed away from storm drains and planting beds rather than left to flow wherever the slope of the driveway happens to take it.
How to tell patio cleaning is needed
Concrete and hardscape buildup shows up in a handful of specific, checkable ways rather than as one general dirty look. Dark stains from oil, tires, or rust that don't fade at all after repeated rain, and instead seem to spread slightly at the edges over time, are the kind of staining plain water was never going to remove on its own. A surface that feels noticeably slick specifically when wet, beyond what plain wet concrete normally feels like, usually means an algae or mildew film has built up, since that film is what actually creates the slipperiness.
A green or black tinge concentrated in shaded corners or low spots where water tends to pool after rain is that same growth getting a head start in the areas that stay damp longest. And a white, powdery haze on the surface — sometimes mistaken for a light coat of dust — is a mineral deposit called efflorescence, which is a different problem from ordinary dirt and needs a different approach to treat.
What goes wrong when patio cleaning is done badly
Etching and striping from a close wand. Holding a pressure washer tip too close to bare concrete, or moving it too slowly, can etch a visible line or swirl pattern directly into the surface — a mark that doesn't wash out because it's physical erosion of the top layer of the slab, not dirt.
Discoloring sealed or stamped concrete. Sealed and stamped decorative concrete can lose its sheen or develop a blotchy, uneven look when cleaned at the same pressure used on plain broom-finish concrete, since the sealer layer itself is thinner and softer than the concrete underneath it.
Spreading oil stains instead of lifting them. Blasting an oil or grease stain with straight pressure and no chemical pre-treatment tends to push the stain outward into the surrounding pores of the concrete, turning a contained spot into a much larger faded halo that's harder to treat afterward.
What keeps the problem from coming back
Whether a driveway or patio stays clean longer after a wash comes down to what's allowed to soak into the surface afterward. A penetrating or film-forming sealer applied right after cleaning fills the pores that algae, oil, and organic stains would otherwise work their way into, and it's the single biggest factor in how much longer the surface actually stays clean. Sweeping the surface on a routine basis, rather than letting leaves and clippings sit and decompose, keeps organic material from building into the kind of set-in staining that needs professional treatment later.
A fresh oil or fluid drip wiped up or treated with an absorbent within a day sets far less deeply into the concrete's pores than the same drip left for weeks, which makes prompt cleanup more effective than any amount of pressure applied afterward. And a low spot that holds standing water after every rain gives algae and mildew a head start that a flat, well-draining surface doesn't, so improving drainage there specifically reduces staining in that exact spot rather than across the whole slab.
What patio cleaning costs
61 per square foot. The figure is scoped to a patio or deck surface with a moderate soil level. These numbers summarize public pricing research for this type of job rather than a quote from a specific company — actual pricing depends on the scope of the job and who is hired to do it.
A specific job can land anywhere in this range depending on its scope and who is hired, so comparing a couple of local quotes remains the most reliable way to narrow it down. Source: Angi / Homewyse, 2026.
How to choose who does patio cleaning
Does the quote specify the PSI and method — pressure wash vs. soft wash — for each surface? The wrong PSI on siding, roofing, or wood can cause damage, so the method should be disclosed per surface, not left as one generic number. Is a written scope listing every surface included — driveway, siding, deck, roof, fencing — provided? Bundled pricing sometimes covers only one or two surfaces despite sounding comprehensive. Are the cleaning chemicals used, and their effect on nearby landscaping and pets, disclosed before the job? Soft-wash detergents vary in strength, and runoff can affect plants or pets nearby. Does the estimate distinguish concrete or driveway work from roof or siding work? Roof and siding washing typically require lower pressure and different technique than concrete, and pricing that lumps them together can hide risk. What is the policy if pressure washing reveals pre-existing damage, like cracked paint or loose mortar? Pre-existing conditions can surface once dirt is removed, so it helps to know how that gets handled before agreeing to the job. Is post-treatment sealing for driveways or decks included in the price or billed separately? Sealing is often an add-on, not part of a basic wash.
No mention of PSI or method — pressure vs. soft wash — for each surface. The wrong pressure on siding, roofing, or wood can cause real damage, and a quote that has not specified method per surface has not actually assessed the job. A price far below every comparable bid for the same square footage. An unusually low price can mean lower-grade equipment, no pre-treatment chemical, or rushed coverage that leaves streaking. No mention of what chemicals are used or their effect on landscaping. Undisclosed chemical strength is how plants and grass near the work area end up damaged. Full payment demanded before the job starts. Paying in full upfront removes leverage if streaking, missed spots, or damage shows up afterward. Pressure to add extra services on the spot without a separate written price. Add-ons proposed in the moment are harder to compare against other bids.
Where patio cleaning is covered
Patio Cleaning is covered across the Brandon area, including Valrico, FL · Riverview, FL · Seffner, FL · Bloomingdale, FL · Palm River-Clair Mel, FL · Lithia, FL · FishHawk, FL · Apollo Beach, FL · Mango, FL · Progress Village, FL · Dover, FL · East Lake-Orient Park, FL · Thonotosassa, FL · Fish Hawk, FL · Temple Terrace, FL · Gibsonton, FL · Tampa, FL · Plant City, FL · Balm, FL · University, FL · Egypt Lake-Leto, FL · Lake Magdalene, FL · Carrollwood, FL · Sun City Center, FL · Pebble Creek, FL · Willow Oak, FL · Lutz, FL · Ruskin, FL · Town 'n' Country, FL · Wimauma, FL.
For patio cleaning in the Brandon area, request a quote — coverage and pricing work the same across every town listed above.
See Progress Village, FL for more, or check out everything Brandon homeowners can book with us across the area for our complete lineup.
Ready to get started?
Talk to a local pressure washing pro in Brandon — get a written quote.
Other Pressure Washing Services in Brandon
Pool Deck Cleaning in Brandon, FL
Pool deck cleaning in Brandon, FL — chemical-safe cleaning that restores slip resistance and removes algae staining.
Learn More
Rust Removal in Brandon, FL
Professional pressure washing to remove rust stains from driveways, sidewalks, and exterior surfaces.
Learn More
Oil Stain Removal in Brandon, FL
High-pressure cleaning to remove oil stains from driveways, garages, and other surfaces.
Learn More
Brick Cleaning in Brandon, FL
Professional pressure washing to remove dirt, grime, and stains from brick surfaces.
Learn More
Vinyl Siding Cleaning in Brandon, FL
Professional pressure washing to remove dirt, mold, and grime from vinyl siding.
Learn More
Parking Lot Cleaning in Brandon, FL
High-pressure washing to remove dirt, oil, and debris from parking lot surfaces.
Learn MoreCommon Questions About Pressure Washing in Brandon
Everything you need to know about pressure washing services in Brandon
How much does Patio Cleaning typically cost in Brandon, FL?
Why does algae and mildew growth on homes in Brandon, FL come back so quickly?
Are the cleaning chemicals used in soft washing safe for landscaping and pets?
Would home insurance cover damage caused by improper pressure washing?
Can pressure washing strip paint or an existing sealant off a surface?
Is renting a pressure washer and doing the job at home a reasonable option?
Need Pressure Washing in Brandon?
Get a written quote from our Brandon crew.
⏰ We answer your call • Serving all of Brandon and surrounding areas